Competent Person

The objective of the ANSI 10.34 Class is to introduce contractors to the standard and its intention “for use as a guideline to provide protection for the public.” This course covers the responsibilities, implementation of a safety performance program, initiation of required responsibilities, development for prevention of typical construction hazards, establishing security, the requirements and processes for conducting Accident Investigations, and the repairs and replacements. As well, it will enhance management of B-S-Q-S & P … Budget, Schedule, Quality, Safety, and … People.

This class covers an introduction to NFPA 70E and Arc Flash Safety, OSHA Safe Practices, Energized Work Hazard Control Plans, lock out / tag out, electrical burns and 1910.303.

This is a three-day course designed to help your employees better understand blueprints and how to read them. It covers reading & using measuring tools, mathematics, construction materials & symbols, and drawing: pictorial, orthographic, plot plans, foundation, commercial, residential, plumbing, and many more.

This is a fast-paced, 8-hour course designed to assist your supervisors, foremen, estimators and workers in confined space safety and to meet the required OSHA standards. It includes an introduction to OSHA, review of 29 CFR Parts 1926.1201 thru 1926.1213, and the identification of various types of confined spaces in construction. Additionally, this course covers duties of the employer, confined space permitting, hazardous atmospheres, PPE requirements and rescue equipment. All attendees will receive a student manual and a laminated course completion card.

This is a fast-paced, 8-hour course designed to assist your supervisors, foremen, estimators and workers in confined space safety and to meet the required OSHA standards. It includes an introduction to OSHA, review of 29 CFR Parts 1926.1201 thru 1926.1213, and the identification of various types of confined spaces in construction. Additionally, this course covers duties of the employer, confined space permitting, hazardous atmospheres, PPE requirements and rescue equipment. All attendees will receive a student manual and a laminated course completion card.

Prior to registering for this class, all prospective trainees must acknowledge that this virtual presentation of the Excavation Competent Person class does not satisfy the training and/or continuing education requirements outlined by the Georgia Secretary of State’s office for initial licensure, or license renewals. Only approved safety courses taught in-person by a qualified instructor are eligible for consideration by the Licensing Board. You are welcome to attend this virtual class in person if you need to, please reach out to bberry@hbnext.com to set up arrangements. 

Please don’t hesitate to contact the HB NEXT Office with any questions @ 770-619-1669.

This 8-hour class meets OSHA requirements to qualify supervisors, foremen and other employees, in CPR / 1st Aid. It covers an introduction to OSHA standards, a review of 29 CFR Part 1926.33, Part 1926.50, Part 1910.20, Part 1910.1030, emergency care qualification by student demonstration and hands on practice and use of manikins to develop knowledge, skill and confidence. All attendees will receive a completion card upon completion.

This 8-hour class meets OSHA requirements to qualify supervisors, foremen and other employees, in CPR / 1st Aid. It covers an introduction to OSHA standards, a review of 29 CFR Part 1926.33, Part 1926.50, Part 1910.20, Part 1910.1030, emergency care qualification by student demonstration and hands on practice and use of manikins to develop knowledge, skill and confidence. All attendees will receive a completion card upon completion.

This is a full day course designed to meet your supervisors, foremen, estimators, and workers needs for the new OSHA Subpart CC standard. It covers an introduction to OSHA Subpart CC, a review of 29 CFR Part 1926.1400 thru 1926.1441, a review of ANSI and Crane Management Plan, mandatory crane inspection and maintenance, critical lift planning, protection of the public, communication and crane signals – ANSI and OSHA Reviews. All attendees will receive a student training manual and a certificate of completion. This is not a CCO – (Certified Crane Operator) Class.

This is a full day course designed to meet your supervisors, foremen, estimators, and workers needs for the new OSHA Subpart CC standard. It covers an introduction to OSHA Subpart CC, a review of 29 CFR Part 1926.1400 thru 1926.1441, a review of ANSI and Crane Management Plan, mandatory crane inspection and maintenance, critical lift planning, protection of the public, communication and crane signals – ANSI and OSHA Reviews. All attendees will receive a student training manual and a certificate of completion. This is not a CCO – (Certified Crane Operator) Class.

This 4 hour course designed to meet GUFPA’s required training as well as educate all others in the utility laws and dangers. This course is approved for four hours continuing education credit by the Georgia Secretary of State. It includes an introduction to Georgia Dig Law, an overview of Georgia Overhead Law, the rules of the Georgia Underground Marking Standards and all attendees will receive a student manual and a laminated class card for this course.

This 4 hour course designed to meet GUFPA’s required training as well as educate all others in the utility laws and dangers. This course is approved for four hours continuing education credit by the Georgia Secretary of State. It includes an introduction to Georgia Dig Law, an overview of Georgia Overhead Law, the rules of the Georgia Underground Marking Standards and all attendees will receive a student manual and a laminated class card for this course.

Prior to registering for this class, all prospective trainees must acknowledge that this virtual presentation of the Georgia 811 / GUFPA class does not satisfy the training and/or educational requirements outlined by the Georgia Public Service Commission for the purpose of responding to a Notice of Probable Violation (NOPV) of the Georgia Dig Law (GUFPA) . Only approved safety courses taught in-person by a qualified instructor are eligible for consideration by the Georgia Public Service Commission. Please don’t hesitate to contact the HB NEXT Office with any questions @ 770-619-1669.

This 8 hour course is designed to meet your supervisors, foremen, estimators, and workers needs in excavation & trenching safety and the required OSHA standards. It includes an introduction to OSHA, review of 29 CFR Part 1926.650 – 1926.654, soil analysis procedures, sloping options and requirements, use of tabulated data and an understanding of hazardous atmospheres. All attendees will receive a student manual including Subpart P, and a laminated course completion card for this course.

This 8 hour course is designed to meet your supervisors, foremen, estimators, and workers needs in excavation & trenching safety and the required OSHA standards. It includes an introduction to OSHA, review of 29 CFR Part 1926.650 – 1926.654, soil analysis procedures, sloping options and requirements, use of tabulated data and an understanding of hazardous atmospheres. All attendees will receive a student manual including Subpart P, and a laminated course completion card for this course.

Prior to registering for this class, all prospective trainees must acknowledge that this virtual presentation of the Excavation Competent Person class does not satisfy the training and/or continuing education requirements outlined by the Georgia Secretary of State’s office for initial licensure, or license renewals. Only approved safety courses taught in-person by a qualified instructor are eligible for consideration by the Licensing Board. You are welcome to attend this virtual class in person if you need to, please reach out to bberry@hbnext.com to set up arrangements. 

Please don’t hesitate to contact the HB NEXT Office with any questions @ 770-619-1669.

This 8 hour course designed to meet your supervisors, foremen, estimators, and workers needs in fall protection safety and the applicable OSHA standards. It includes introduction to OSHA standards, the “Duty” of the employer, Subpart “M” General Requirements, a review of 1926.500 – 1926.503, Personal Fall Arrest Systems, demonstration of Fall Protection – PPE, and how to develop and maintain a Fall Protection Plan.

Este curso de 8 horas está diseñado para satisfacer los requisitos de entrenamiento para sus Supervisores, Capataces, Estimadores y Trabajadores Generales sobre las Reglas de Seguridad y Protección Contra Caídas debajo de las Estándares Federales de OSHA que son aplicables. Se incluye una introducción a las normas de OSHA (Administración de Seguridad y Salud Ocupacional de EE.UU.), las Responsabilidades del Empleador, los Requisitos generales de la Subparte “M” (Protección Contra Caídas), una revisión de las leyes debajo de los Estándares de 1926.500 – 1926.503, Sistemas Personales de Protección Contra Caídas, y una demostración de cómo usar sistemas de protección contra caídas – el Equipo de Protección Personal (PPE, en inglés), y cómo diseñar y mantener su plan para prevención de caídas en su sitio de trabajo.

This is an 8-hour course designed to educate employers and commercial driver licensed employees on the safety regulations and the drug / alcohol testing regulations set forth by the U.S. Department of Transportation. The course covers FMCSA Regulations, types of FMCSA Inspections, an overview of 49 CFR Part 40, CDL Standards, Requirements, and Penalties and testing procedures for alcohol and drug abuse. All attendees will receive a student training manual and a laminated class card for this course.

This is a 4-hour course tailored to your equipment and designed to meet your supervisors, foremen, operators, and worker’s needs, and the required OSHA standards. The course covers an introduction to OSHA, a review of 29 CFR Part 1926.602 and 29 CFR Part 1910.178, a discussion and review the operators manual, learning important inspection & documentation procedures and all attendees will receive a student training manual including 29 CFR Parts 1926.602 & 1910.178 and a laminated class card for this course.

Employee training includes, but is not limited to:
• An introduction to the Global Harmonization System (GHS)
• An introduction to Safety Data Sheets (SDS)
• Description of the jobs where these hazards are present
Also:
• Physical and health hazards of the chemicals that present potential exposure
• Personal protection requirements for chemicals
• Spill reporting requirements and planning considerations
• Emergency procedures and documentation

This is a 4-hour course tailored to your equipment and designed to meet the needs of your supervisors, foremen, operators, and workers as well as the required OSHA standards. It includes an introduction to OSHA, a review of 29 CFR Part 1926.453 and ANSI, a discussion and review the operator’s manual, learning the important inspection & documentation procedures and all attendees will receive a student training manual and a laminated class card for this course.