Classes

This course prepares drivers to confidently navigate a roadside DOT inspection. It outlines the documentation that must be carried at all times, both on the driver’s person and in the vehicle. Attendees will understand the importance of inspection reports, how to respond to officer inquiries, and how violations affect CSA scores. This course is especially valuable for companies seeking to reduce inspection-related citations and maintain a strong compliance profile.

This course will cover an introduction to OSHA, distracted driving and defensive driving. Learn about the changing driving culture and tips on how to combat distracted driving. How to identify driving hazards, an understanding of defensive driving techniques and how to use them to prevent accidents and injuries on the road.

Attendees will be able to identify the hazards that can affect employees when application of the standards under 29 CFR 1926.400 Subpart K and 1910.147 Subpart S are not correctly applied in the workplace. The course will cover an introduction to OSHA, review 29 CFR Part 1910.147 & 29 CFR Part 1926.400, discussion of scope, application and purpose of electrical standards, development of knowledge of electrical hazards, and implementation of procedures including GFCI requirements, inspection of cords, tools, receptacles, junction boxes and more.

This course includes an introduction to OSHA and Subpart O, other OSHA and Federal requirements and an equipment manual review.

This 8 hour course is designed to meet your supervisors, foremen, estimators, and workers needs in excavation & trenching safety and the required OSHA standards. It includes an introduction to OSHA, review of 29 CFR Part 1926.650 – 1926.654, soil analysis procedures, sloping options and requirements, use of tabulated data and an understanding of hazardous atmospheres. All attendees will receive a student manual including Subpart P, and a laminated course completion card for this course.

This 8 hour course is designed to meet your supervisors, foremen, estimators, and workers needs in excavation & trenching safety and the required OSHA standards. It includes an introduction to OSHA, review of 29 CFR Part 1926.650 – 1926.654, soil analysis procedures, sloping options and requirements, use of tabulated data and an understanding of hazardous atmospheres. All attendees will receive a student manual including Subpart P, and a laminated course completion card for this course.

Prior to registering for this class, all prospective trainees must acknowledge that this virtual presentation of the Excavation Competent Person class does not satisfy the training and/or continuing education requirements outlined by the Georgia Secretary of State’s office for initial licensure, or license renewals. Only approved safety courses taught in-person by a qualified instructor are eligible for consideration by the Licensing Board. You are welcome to attend this virtual class in person if you need to, please reach out to bberry@hbnext.com to set up arrangements. 

Please don’t hesitate to contact the HB NEXT Office with any questions @ 770-619-1669.

This course will allow someone to refresh their knowledge about soil analysis, the use of protective systems and the requirements of Subpart P.

This course will cover an introduction to OSHA Standards, the “duty” of the employer, Subpart “M” general requirements, a review of 1926.500 – 1926.503, personal fall arrest systems, demonstration of Fall Protection – PPE – and development and maintenance of a Fall Protection Plan.

This 8 hour course designed to meet your supervisors, foremen, estimators, and workers needs in fall protection safety and the applicable OSHA standards. It includes introduction to OSHA standards, the “Duty” of the employer, Subpart “M” General Requirements, a review of 1926.500 – 1926.503, Personal Fall Arrest Systems, demonstration of Fall Protection – PPE, and how to develop and maintain a Fall Protection Plan.

Este curso de 8 horas está diseñado para satisfacer los requisitos de entrenamiento para sus Supervisores, Capataces, Estimadores y Trabajadores Generales sobre las Reglas de Seguridad y Protección Contra Caídas debajo de las Estándares Federales de OSHA que son aplicables. Se incluye una introducción a las normas de OSHA (Administración de Seguridad y Salud Ocupacional de EE.UU.), las Responsabilidades del Empleador, los Requisitos generales de la Subparte “M” (Protección Contra Caídas), una revisión de las leyes debajo de los Estándares de 1926.500 – 1926.503, Sistemas Personales de Protección Contra Caídas, y una demostración de cómo usar sistemas de protección contra caídas – el Equipo de Protección Personal (PPE, en inglés), y cómo diseñar y mantener su plan para prevención de caídas en su sitio de trabajo.

This 8 hour  virtual course is designed to meet your supervisors, foremen, estimators, and workers needs in fall protection safety and the applicable OSHA standards. It includes introduction to OSHA standards, the “Duty” of the employer, Subpart “M” General Requirements, a review of 1926.500 – 1926.503, Personal Fall Arrest Systems, demonstration of Fall Protection – PPE, and how to develop and maintain a Fall Protection Plan.

This course will cover an introduction to OSHA Standards, the “duty” of the employer, Subpart “M” general requirements, a review of 1926.500 – 1926.503, personal fall arrest systems, demonstration of Fall Protection – PPE – and development and maintenance of a Fall Protection Plan.

This is an 8-hour course designed to educate employers and commercial driver licensed employees on the safety regulations and the drug / alcohol testing regulations set forth by the U.S. Department of Transportation. The course covers FMCSA Regulations, types of FMCSA Inspections, an overview of 49 CFR Part 40, CDL Standards, Requirements, and Penalties and testing procedures for alcohol and drug abuse. All attendees will receive a student training manual and a laminated class card for this course.

This course will cover the importance of implementing a safety program, a review of OSHA Subpart F (1926.150-1926.155) the different classifications of fire extinguishers, and methods for observing, detecting, and handling hazardous materials.

This is a 4-hour course tailored to your equipment and designed to meet your supervisors, foremen, operators, and worker’s needs, and the required OSHA standards. The course covers an introduction to OSHA, a review of 29 CFR Part 1926.602 and 29 CFR Part 1910.178, a discussion and review the operators manual, learning important inspection & documentation procedures and all attendees will receive a student training manual including 29 CFR Parts 1926.602 & 1910.178 and a laminated class card for this course.

This course will cover a review of BMP’s, understanding when they are required and by whom, the three keys to BMP’s, vegetative practices and structural practices.

Employee training includes, but is not limited to:
• An introduction to the Global Harmonization System (GHS)
• An introduction to Safety Data Sheets (SDS)
• Description of the jobs where these hazards are present
Also:
• Physical and health hazards of the chemicals that present potential exposure
• Personal protection requirements for chemicals
• Spill reporting requirements and planning considerations
• Emergency procedures and documentation

This class covers the location of the written Hazard Communication Program, a list of hazardous materials, Safety Data Sheets (SDS), descriptions of the jobs where these hazards are present, physical and health hazards of the chemicals that present potential exposure, personal protection requirements for chemicals, ways to observe and detect the presence of hazardous chemicals, labeling requirements and explanation of labeling system, where to find SDS and how to read them, first aid requirements and emergency response information, and when an employee of another company performs work and there is a potential for exposure to a hazardous chemical.

This is a must have, informative, 2-hour seminar designed to assist your field supervisors and foremen in “dealing with” and reducing conflicts with, the G.C. Superintendent and/or client. It includes an introduction, redefining of responsibilities discussion of written and verbal communication skills, a review of how to properly represent the company and the importance of building a successful relationships.

This fast paced seminar is one of the many management tools your field supervisors and foremen need in today’s construction industry. It covers an introduction to OSHA, a review of the OSHA inspection process, how to interact with the OSHA inspector, documentation recommendations and “how to” have a successful inspection.